The Low Shank Snap-on Adapter allows you to use all those great low shank presser feet, like the ones in our 32 PCS presser foot set, on most low shank machines with screw on presser feet. Just think how easy it will be to snap on and sew with the many universal snap-on feet available.

This Low Shank Snap-On Adapter is the solution!

Specifications

• Made of zinc alloy and plastic
• Measurements: ¾” tall x ⅞” deep x ¼” wide
• Fits perfectly on your low shank machine (including Pfaff and Husqvarna Viking low shank machines)
• Fits all our snap-on presser feet like the presser foot with ruler, stitch-in-the-ditch foot and the adjustable bias binding foot
• Not necessary for our screw-on presser feet like the darning foot, walking foot and flower stitch foot
• All Pfaff sewing machines need this adapter to use our snap-on presser feet
• All Husqvarna Viking models group 5, 6 and 7 need this adapter to use our snap-on presser feet

Instructions & More

For detailed instructions on how to attach and use this adapter view our: Low Shank Snap-on Adapter Manual.

If you are not sure what kind of shank you have, read our complete article about shanks, adapters and presser feet to learn if you need an adapter for your specific sewing machine and if so, which one.

If after reading all of this information, you are still not sure if this adapter will work for your machine, give it a try. If it doesn't fit we will refund you the purchase.

This surprise item will help you:

• help you stitch a straight seam 
• help you stitch an accurate seam
• guide you through inner and outer curves
• topstitch on the edge of your project

We can't give too much away, but we know you'll love it! 

The Magnetic Pincushion is a simple but great organizing tool.

This sturdy little plastic plate with a powerful magnet inside is a fast option to keep your sewing area tidy and safe.

If you sew, you know that pins drop or fall. With this lovely little tool, dropping pins is much less of a problem! If they fall, you can sweep them all up easily with this colorful magnetic plate. And, pins are easy to grab and to drop back onto the plate, allowing you to keep your eyes on your work without interruption.

With this little magnetic tool, you will stay organized. There will no longer be pins lying around on your sewing table because you didn’t take the time to stick the pins back in their container after using them.

OTHER USES

You can also use this magnetic plate for sewing clips, paper clips, thumb tacks, nails, screws, or other small metal objects.

Specifications

• Size: 3 ¼ x 3 ¼ inch
• Materials: Strong magnet and plastic
• Two colors available: Lime Green & Purple (you choose before checking out)

Instructions & More

Place pins on the Magnetic Pin Cushion. When you need the pins, just grab them and keep on working. No need to interrupt your work.

If pins fall, sweep the magnetic pin cushion across them to pick them up.

The Magnetic Pin Cushion can also be used to pick up other small metal objects by sweeping it across them.

The Rolling Seam Presser is a neat little multi purpose tool that can help you make the most of your valuable sewing, quilting or crafting time.

You can use it to temporarily press your seams enough so you can keep on quilting (including paper piecing) or sewing. No more having to get up and down repeatedly to go to your iron and pressing mat. You’ll also save your fingernails as you won’t have to use them as a makeshift press.

When you need to set small seams, the wood roller can be used as a mini tailor’s clapper.

In addition, the Rolling Seam Presser can be used in paper crafting, scrapbooking and more!

And, the lightweight plastic handle and wood roller makes it easy to toss the Rolling Seam Presser into your project bag when you want to use it on the go.

Uses

• Temporarily press seams when sewing, quilting or paper piecing
• As a mini clapper
• Press seams on cards
• Scrapbooking
• Mini, tight spot, wallpaper roller (in a pinch - as you may not be able to use again for crafting if glue gets on it)

Specifications

• Made of lightweight plastic and lightweight wood
  
• Total Length = 7.4 inches (18.8cm)
• Handle length = 5.9 inches (15cm)
• Roller part length = 1.5 inches (3.8cm)
• Roller width = .9 inches (2.3cm)

Directions

Check out the Rolling Seam Presser manual for more details on how to use it and videos that show it in action.

Use the Overcast Presser Foot, a universal sewing machine attachment, in combination with an overcasting stitch to get neatly finished edges. With this foot, overlock or overcasting stitches will bind the edge of the fabric perfectly to prevent it from fraying. The end result looks like the finished edges that a serger creates! 

The overcast foot features 

• a guide bar at the side to keep the fabric in line and 

• a bridge in the middle to make sure the stitches lay flat. 

Your overcasting stitches are created right on the edge and your fabric will not bunch up or pucker. Varying zig zag and overlock stitch widths can be used with this foot. Most home sewing machines have at least 1 or 2 built-in overlock/overcast stitches. It can also be used for stretch and knit fabrics.

If you go back and forth between wanting a serger and being happy with your sewing machine, first take your chance on the overcast presser foot. You will be glad you did because this foot really works (and you can use the money you saved on fabric :-) The only difference is that the overcast foot does not cut the fabric like a serger. 

Even people that own a serger sometimes prefer using an overcast foot over their serger. A serger can be a pain to set up and thread with a new color. You will definitely gain time when you want to change the thread color to finish a project's edge!

Use your home sewing machine like a serger!

This Presser Foot is also included in our top-of-the-line 32 pcs Presser Foot Set.

Specifications

The overcast presser foot is a universal snap on sewing machine attachment that fits on most low shank home sewing machine brands.

On some brands or models you might need an adapter to be able to attach and use this presser foot. Read our complete article about shanks, adapters and presser feet to learn if you need an adapter for your specific sewing machine and if so, which one.

Instructions & More

• Go slow - the needle does have to go back and forth over the vertical metal piece, but gives a very even stitch.

• Cut your seam allowance down to ¼  inch if your seam allowances is ½  - ⅝  inch. 

• There is a bar in the center of the presser foot that controls the stitches. Be careful when you finish sewing and go to remove your fabric, as the last few stitches will be caught over this bar. Pull the fabric away from you, toward the back of your sewing machine, in order to free the thread from the bar. Otherwise, you might tear or distort the last few stitches.

For more information about the use of this presser foot, go to our online user instructions about the overcast presser foot. 

We also have an interesting blog article on the MadamSew sewing blog explaining how to use your your sewing machine as a serger.

Upgrade your DIY sewing kit with our Double-Sided Fusible Hem Tape – a quick, durable solution to keep fabric layers bonded without the hassle of sewing. Simply use your iron to adhere two layers of fabric for a clean, professional finish. This high-quality hem tape is almost invisible and works on a wide range of fabrics, from delicate lightweights to heavier materials.

Key Features:

• Iron-On Convenience: No sewing machine needed! Just place, press with a hot iron, and your hem is set.
• Strong, Invisible Bond: Double-sided adhesive creates a secure, nearly invisible seal, giving your projects a polished look.
• Versatile for Various Fabrics: Suitable for most fabrics, from lightweight blouses to heavier drapery.

Why Choose Our Fusible Hem Tape?

This hem tape is the ultimate go-to for quick fixes and finishing touches, whether you’re crafting, mending, or creating. Perfect for those who want professional-looking results without needing advanced sewing skills.

Perfect For:

• Hemming Pants and Skirts – Easily adjust hems on trousers, skirts, and dresses without a sewing machine.
• Curtain Alterations – Great for adjusting curtain lengths or finishing edges.
• Fabric Binding & Applique – Ideal for adhering appliqué or binding, giving your project a clean finish.
• Pre-Basting Before Sewing – Use as a temporary adhesive to secure fabrics before stitching.

Customer Review:

"Super easy to use, good quality! Just place between fabric, iron, and you're done – holds the material very well!"

Why It Works:

This fusible hem tape is a top-rated choice for crafters and sewers alike, saving time and adding reliability to each project. Grab yours today for an effortless, no-sew solution to hems and beyond!

Specifications

• Length: Each roll includes 50 yards (45.72 meters) of high-quality fusible hemming tape, ensuring you have plenty for multiple projects.
• Width Options: Available in two widths to suit different project needs:
  • 1 cm (0.39 inch) wide
  • 2 cm (0.79 inch) wide
• Material: Transparent mesh adhesive with a paper backing on one side, allowing for easy, step-by-step application.
• Application: Iron-on; designed for effortless, no-sew hemming with only an iron required.

Perfect for both small repairs and larger projects, this tape provides a versatile, reliable finish that’s as strong as it is subtle!

Instructions & More

How to Apply Fusible Hemming Tape:

1. Position the Tape: Place a strip of tape along the hemline or edge of your fabric where you want to bond the layers.
2. Step 1 – Initial Bonding: With the paper backing still on, apply heat from a household iron or pressing machine over the tape. This secures the tape lightly to the fabric, allowing you to work in steps.
3. Step 2 – Remove Paper Backing: Once the tape is secured, peel off the paper backing to reveal the adhesive side of the tape.
4. Step 3 – Final Bonding: Fold the fabric over the exposed adhesive side of the tape and press with your hot iron to permanently bond the layers.

Pro Tip: The tape is designed to handle various iron settings since you never apply heat directly to it – there’s always a layer of paper or fabric in between.

For Use as Basting Tape: Allow the glue to cool completely before sewing over it. Hot glue may leave residue on your needle.

Note: Detailed instructions are provided inside the packaging of Madam Sew Fusible Hem Tape.

The Body Self Measuring Tape: Measure the circumference of your waist, arm, thigh, chest, hips, and more with this easy to use circular measuring tape. The combination of the smart lock and the retractable tape makes taking measurements on other people or yourself so much faster. You won't need help for a quick measurement check. For example: Just wrap it around your waist, lock it in place, retract the tape until it fits snugly and you have your exact waist size.

This body measurement tape is a true improvement compared to the old loose tape measures. A must have for garment sewers!

• Accurate Measurements
• Measures up to 60 inches in circumference
• Push Button Retraction
• Measurement in inches and centimeters
• Locks to ensure tape stays in place

Specifications

• The case is made of strong, durable, thermoplastic, ABS
• The measuring tape is made of flexible, durable, long-lasting, PVC
• Size of case: 3.5” x 2.5” (8.9cm x 6.4cm)
• Measures up to 60 inches in circumference
• Measurement in inches and centimeters

Instructions & More

For detailed instructions and video go to our: Body Self Measuring Tape Online Manual.

Note: The soft measuring tape begins its measurement at 2 inches / 5 cm to account for the width of the hand-held case.

A heat resistant, and reusable Non-Stick Sheet will act as a protective heat barrier between your hot iron and your fabrics or applique during any sewing, quilting or crafting project. 

Never worry about sticky residue on your iron sole or heat damage to your projects! This pressing sheet prevents shine marks, scorch marks, burn marks or flattening on delicate or textured fabrics. The white sheet is semi transparent so you can see where you are ironing. These cover sheets are reusable up to 1000 times.

Perfect to:

• iron delicate fabrics and clothing (silk, nylon, corduroy, velours)

• apply appliques, Heat Transfer Vinyl (HTV), Fusible Hem Tape, Fusible Interfacing or anything sticky or glue based 

• use with any brand of iron or heat press

We also have a bigger size protective ironing cloth, which is just for delicate fabrics. To fuse sticky materials onto fabrics we advise to use these non-stick pressing sheets.

This Non-Stick Sheet also comes with the Heat Transfer Vinyl Bundle

Specifications

Size: 11 x 15 inch ( 30 x 40 cm) -  0.1mm thick

Material: Fiberglass with Teflon coating. Resists all iron temperatures well.

1 pack includes 2 non-stick pressing sheets

Instructions & More

To use, place the non-stick sheet on your garment and iron. When using delicate fabrics do not use on super high temperature settings.

More details about the use of these ironing sheets can be found in the non-stick sheet user manual.

If you find the small rippers hard to hold on to, this Deluxe Seam Ripper might be the right tool choice for you!

A seam ripper is one of the most essential tools in your sewing box. It is always handy to have one around when things don't go as planned. Use a seam ripper to remove unwanted stitches & threads or to open a button hole. This Deluxe Seam Ripper does all that with minimal effort. You’ll be amazed by the performance and quality of this tool.

The Deluxe Seam Ripper has a larger handle than the standard seam rippers. At 3 ⅝ inches it will fit comfortably in your hand. The soft ergonomic grip will eliminate stress and strain on your hand. The ball end of the handle fits comfortably in your palm. And, of course, this seam ripper has a sharp and durable steel blade. The pointed tip is thin enough to grab those tiny stitches and it has a safety ball to protect your fabric from any accidental damage. 

This Deluxe Seam Ripper is an indispensable tool for all skill levels from beginners to professionals.

Specifications

Materials:

• Steel blade, shaft and fork

• Plastic cap to protect the ripper end

• Rubber and plastic handle

Dimensions:

• Total length: 5 inches

• The handle; 3 ⅝ inches

• The metal part 1 ⅜ inch,

• The shaft ¾ inch

• The fork ½ inch

Instructions & More

The Deluxe Seam Ripper works the same as a smaller handle seam ripper but has a deluxe handle making it easier on your hands.

To learn how to use a seam ripper, see our regular Seam Ripper Online Manual.

This automatic, desktop Hand Needle Threader makes the task of needle threading an absolute breeze. You can use this lightweight, plastic tool to thread many different threads through small, standard and large needle eyes with ease. Use your threader to thread needles for hand sewing, embroidery, leatherwork, upholstery, quilting, and more! Whether you are making a cushion or embellishing a denim jacket, this tool will help you thread your needles easily and quickly.

It will take you no time at all to thread a needle with this desktop, hand needle threader! Saves you time as well as frustration and it comes with 5 jumbo needles in a built-in needle case!

Specifications

• Orange & white lightweight, durable, plastic tool
• Includes 5 jumbo needles in the built-in needle case
• Measures: 3 inches by 2 inches by 1-¼ inches
• Works with a variety of sewing and quilting needles
• Works well with standard and large needles

NOTE: The threader will not work with very fine embroidery needles.

Instructions & More

Insert the needle -eye down- in one of the two funnels, and drop the thread in the slit. One side of the threader is for large eye needles, the opposite side is for small eye needles. Move the white slider sideways, pull the thread end through, and take your needle out. Voila! There is your threaded needle!

For detailed instructions and a video, visit our Hand Needle Threader Online Manual.

How it Works

There are two ‘funnels’ (one for an ordinary needle and one for large ones) in which you place the needle, eye down. Next, you lay the thread in a gulley next to the funnel and move the white slider sideways. Believe it or not, the thread pops through the needle eye in a twinkle of your own eye - pure magic! A small metal plate pushes the thread through the needle eye and it peeks out at the side of the little machine. Grab the loop with your hand and pull one thread end completely through and take the needle out, putting your fingers over the eye to prevent the thread from coming out.. Your needle is threaded!

This sewing ruler is a 6 inch long aluminum gauge with a red sliding guide. Use it to quickly and consistently measure short spaces when sewing or quilting. Measuring correctly can have an enormous impact on the look of any sewing project!

You can set the measurement with the spacer and easily and quickly measure ⅝”, ¼” or ¾” hems or seam allowances. Long tape measures can easily get in the way when making these short measurements. The risk of making mistakes is much greater with regular sewing or quilting rulers. The set plastic spacer is a life saver here! 

Uses

• Pre-determine the dimension of a seam, a seam allowance or a hem

• Mark the distances between button holes, pleats or embellishments and transfer them fast and precisely 

This little lightweight gauge is the perfect size to throw in your bag and take to your sewing class or retreat!

Specifications

Size    6 inch (15.2 cm) long

Scale   inches and centimeters - 1/16 inch (1 mm) accuracy 

Material     aluminum → firm, lightweight, smooth edges, anti-rust and durable

Extra Features

• There are 3 little holes to secure the gauge or the slider with a pin.

• Use the hole in the upper left corner to pivot the ruler to use is as a compass to trace a circle or a curve.

• The point at the upper left corner also helps to turn points and press them out.

• Both columns are designed with useful marking widths. The “inch” column is exactly ¼ inch wide and the “centimeter” column is ⅜ inch wide – great for a quick check or marking line. The inch side of the gauge has 5 notches, one at every inch, to make marking even easier.

Instructions & More

The red plastic guide on this measuring gauge is adjustable, but stays in place for repeated marking. Simply lift the gauge up and down to check your measurements along a hem or seam. 

If you want to read more about how to use the measuring gauge, you can go to the sliding measuring gauge online manual on MadamSew.com.

The High Shank Snap-on Adapter allows you to use all those great low shank presser feet, like the ones in our 32 PCS presser foot set, on most high shank machines (see specifications for more details). Just think how easy it will be to snap on and sew with the many universal snap-on feet available.

This High Shank Snap-On Adapter is the solution!

Specifications

• Made of Zinc alloy
• Measurements: 1 ⅛” high, 1 ⅝” deep and ¼” thick
• Fits all of our low shank presser feet like the 32 PCS presser foot set, the presser foot with ruler and the adjustable bias binding foot
• Examples of machines on which this adapter fits: Juki 2000 QI, Juki DDl-8700, Juki TL2010Q, Pfaff 1222, Pfaff 1209, Brother PQ1500s, Brother 1500, Kenmore 158, Singer, New Home sewing machine and many more!
• Doesn't fit Kenmore super high shank machines, Singer machines with slant shanks, Bernina machines and Janome 8900

Instructions & More

To attach this High Shank Snap-on Adapter, first screw off your regular presser foot. Then, screw this adapter to your presser bar. Now, you can snap on and off our universal presser feet. It’s that easy!

If you are not sure what kind of shank you have, read our complete article about shanks, adapters and presser feet to learn if you need an adapter for your specific sewing machine and if so, which one.

If after reading all of this information, you are still not sure if this adapter will work for your machine, give it a try. If it doesn't fit we will refund you the purchase.

The MadamSew Chalk Marker is a temporary marker with a toothed metal wheel that produces fine lines of chalk on fabrics. These fabric markers are always sharp and draw both straight and curvy lines. No need to sharpen the tip. The chalk doesn’t fade or brush off unwantedly, but is easy to remove. The chalk marker’s wheel rolls smoothly over cotton, knit fabrics, jersey, synthetic fibers, suede, leather... (Don’t use them on silk and nylon fabrics!)

• Very fine and precise chalk lines on many different types of fabric

• Dosing wheel technology: a toothed metal wheel at the tip distributes the chalk evenly as you roll it along

• Always sharp

• Reliable chalk lines, that stay put while sewing

• Ergonomic design; easy to hold because of the recessed tip and the overall shape of the pen

• Has a cap; protects the wheel and makes sure the chalk stays in the pen

• Refillable;  chalk marker refills are available in our sewing and quilting store

The powdered chalk comes in 3 colors: red, yellow and white. Don’t forget to choose your color when you order. Having more than one color at your disposal allows you additional options when marking fabrics of different hues and prints, or if you need to make distinguishing marks on your fabric.

Check out our other colors:

• White Chalk Marker
  
• Red Chalk Marker
  

Specifications

SIZE: 4 inches long, ½ inch thick

WEIGHT: 0.68 oz (19 gm) 

Available in 3 colors: yellow, white, red. Choose your color before you place an order! 

Check out our other colors:

• White Chalk Marker
  
• Red Chalk Marker
  

The chalk markers are refillable, buy your chalk marker refills here : https://madamsew.com/products/chalk-marking-pens-refills

Instructions & More

The MadamSew Chalk Markers don’t fade or brush off too easily, but at the same time they are not hard to rub off either. Gently rub the fabric with your hands or a brush, wash out with plain water, or remove with a damp cloth. 

Always test on a scrap or back of all project fabrics before using any marker on a finished project. You never know how a certain fabric will react!

If you want to learn more about the chalk markers and how to use them, check out our online tutorial and video about the MadamSew Chalk Markers.

Use the MadamSew Quarter Inch Seam Tape as a guide for sewing diagonal 1/4 inch seams.

Save time by not marking your fabric. Simply align the red center line of the tape with your sewing machine needle/presser foot and stick the tape down - the golden lines on either side of the tape are exactly ¼” from the center. 

Our craft tape is thin and strong and will stay on your sewing machine until it is removed leaving no residue behind.

Specifications

1 package contains 2 rolls of 5 ½ yards each

Measurements: 5/8 inches wide and 5 ½ yards (5m) long, with ¼ inch marking every 12 inches

Material: Rice Paper Washi Tape

Instructions & More

For detailed instructions on using this seam guide craft washi tape, see our Quarter Inch Seam Tape Online Manual.

Note:  This tape is not meant to be a permanent fixture on your machine, we recommend replacing the tape with a fresh piece after every project in order to avoid any residue on your machine.

The Invisible Zipper Foot is very different from a standard zipper foot. It has 2 grooves at the bottom of the foot which hold the zipper coils in place while you stitch. This creates even stitches that are very close to the zipper coil resulting in a flat finish with invisible fastening.

The invisible zipper foot makes the process of sewing an invisible zipper MUCH easier and faster. It’s even easier to insert an invisible zipper than setting in a regular zipper!

Use the invisible zipper foot to insert an invisible zipper in a dress, a skirt, or even a décor pillow. This foot will save you time and energy and you’ll get great results!

NOTE: You can only use this foot with an invisible zipper.

This Presser Foot is also included in our top-of-the-line 32 pcs Presser Foot Set.

Specifications

Foot Details

• Materials: Zinc alloy
• Size: ⅞” x ⅝” x ¼”
• Allows you to install invisible zippers

VERSATILE -  FITS MOST SEWING MACHINES: This foot has a regular snap-on bar and fits most home & domestic sewing that have a low-shank system (Pfaff is an exception, see below for the adapter you need).

Fits on low shank models of these brand machines: Singer, Brother, Babylock, Euro-Pro, Janome, Kenmore, White, Juki, New Home, Necchi, Elna, Husqvarna Viking, Toyota, and most other low-shank domestic machines. Unsure what type your machine is? Click here: to learn how to easily see if your machine has a low shank.

HIGH-SHANK, PFAFF, NOT SNAP-ON, OR BERNINA? You Need An ADAPTER!

- High Shank To Low Shank Snap-on Adapter. Click here.

- Yours is not snap-on? Low Shank Snap-On Adapter. Click here.

- PFAFF? Low Shank Snap-On Adapter. Click here.

- Bernina? Find your Bernina Adapter: Click here. (Be sure to select the bundle Bernina Adapter - Low Shank Snap-On Adapter!)

Read our complete article about shanks, adapters and presser feet to learn if you need an adapter for your specific sewing machine and if so, which one.

Instructions & More

You can only use this foot with an invisible zipper.

An invisible zipper is a zipper with very fine teeth that are not visible from the front– the zipper teeth are visible from the back of the zipper, but not from the top. So, when installed correctly, the zipper is completely concealed.

For detailed instructions, visit our: Invisible Zipper Foot Online Manual.

The MadamSew Darning Foot, also known as a Free Motion Quilting Foot gives you the freedom to move your fabric under your sewing machine needle to create your designs.

The hopper mechanism presses the Darning Foot firmly onto the project, preventing the material from “flagging” (pulling up with the needle during sewing) and ensuring a neat stitch pattern. The transparent lower part of the foot allows the user to easily place and see the stitches.

The Darning Foot is versatile. Use it for:

• free motion quilting
• repairing holes or tears in clothing
• creating freehand monograms
• free-hand embroidery
• thread sketching
• any other free motion sewing

NOTE: This Darning Foot is for Low Shank Machines only.

Specifications

Materials: Plastic, metal and Zinc alloy

Dimensions: Approximately 2.3” x 1” (5.8cm x 2.5cm)

VERSATILE FIT

Fits on low shank models of these brand machines: Singer, Brother, Babylock, Euro-Pro, Janome, Kenmore, White, Juki, New Home, Necchi, Elna, Husqvarna Viking, Toyota, and most other low-shank domestic machines.

Unsure what type your machine is? Click here to learn if your machine has a low shank.

NOTE: This Darning Foot is for Low Shank Machines only.

Instructions & More

For detailed instructions on how to attach the foot and blogs on how to use it, check out the Darning Foot Online Manual.

Madam Sew’s Vintage Ruler Craft tape has multiple uses. Use it as a quick measurement guide on your machine or sewing table or even use it as decoration in your scrapbooks, journals, or gifts! 

The Vintage ruler design with adhesive back has both metric and imperial measurements. Rulers repeat every 12” (30cm).

Our craft tape is thin and strong and will stay on your sewing machine or sewing table until it is removed leaving no residue behind.

Specifications

1 package contains 2 rolls of 5 ½ yards each

Measurements: 5/8 inches wide and 5 ½ yards (5m) long, ruler repeats every 12 inches (30cm)

Material: Rice Paper Washi Tape

Instructions & More

For detailed instructions on using this vintage ruler design craft washi tape, see our Vintage Ruler Craft Tape online manual.

Note:  This tape is not meant to be a permanent fixture on your machine or sewing table, we recommend replacing the tape with a fresh piece after every project in order to avoid any residue on your machine. 

The Red MadamSew Chalk Marker is a temporary marker with a toothed metal wheel that produces fine lines of red chalk on fabrics. These fabric markers are always sharp and draw both straight and curvy lines. No need to sharpen the tip. The chalk doesn’t fade or brush off unwantedly, but is easy to remove. The chalk marker’s wheel rolls smoothly over cotton, knit fabrics, jersey, synthetic fibers, suede, leather... (Don’t use them on silk and nylon fabrics!) 

• Very fine and precise chalk lines on many different types of fabric

• Dosing wheel technology: a toothed metal wheel at the tip distributes the chalk evenly as you roll it along

• Always sharp

• Reliable chalk lines, that stay put while sewing

• Ergonomic design; easy to hold because of the recessed tip and the overall shape of the pen

• Has a cap; protects the wheel and makes sure the chalk stays in the pen

• Refillable;  chalk marker refills are available in our sewing and quilting store

The powdered chalk comes in 3 colors: red, yellow and white. Having more than one color at your disposal allows you additional options when marking fabrics of different hues and prints, or if you need to make distinguishing marks on your fabric.

Check out our other colors:

• Yellow Chalk Marker
• White Chalk Marker

Specifications

SIZE: 4 inches long, ½ inch thick

WEIGHT: 0.68 oz (19 gm) 

Available in 3 colors: yellow, white, red.  

Check out our other colors:

• Yellow Chalk Marker
• White Chalk Marker

The chalk markers are refillable, buy your chalk marker refills here : https://madamsew.com/products/chalk-marking-pens-refills

Instructions & More

The MadamSew Chalk Markers don’t fade or brush off too easily, but at the same time they are not hard to rub off either.

• Gently rub the fabric with your hands or a brush,
• wash out with plain water, or
• remove with a damp cloth. 

TIP: Always test on a scrap or back of all project fabrics before using any marker on a finished project. You never know how a certain fabric will react!

If you want to learn more about the chalk markers and how to use them, check out our online tutorial and video about the MadamSew Chalk Markers.

These 5 spare blades are compatible with the thread knife that comes with the Bird Nest Toolkit. 

Untangle any sewing or embroidery machine thread knot without damaging your project with the Bird Nest Toolkit! The two tools from this kit will help you to carefully untangle the threads that sometimes gather underneath your fabric when sewing or quilting with a sewing or embroidery machine. With the thread knife you can safely cut the threads of a bird nest and free the project from your machine.

These 5 carbon steel spare blades for the thread knife are ultra sharp. They guarantee smooth, clean and safe thread cuts for a long time. 

This is a set of 5 blades, the knife is not included. 

Keep away from children!

Specifications

Material: carbon steel

Size: these replaceable blades fit the thread knife of the MadamSew Bird Nest Toolkit

For safety reasons the blades are wrapped individually. 1 packaging contains 5 blades.

Instructions & More

It just takes a minute to install a replacement blade on the handle of your Bird Nest Toolkit's knife. The blades are super sharp so be extra careful when you handle the blades. 

• To remove the old blade, carefully lift the bottom of the blade until it unlocks from the handle. With one hand you lift the bottom, with the other you pull the blade away from the handle. Slide the blade off the handle, moving it away from the handle.

• To install a new blade, put the handle through the opening of the blade. Align the blade into the groove of the handle and check that the diagonal lines (on the handle) are parallel with the blade. Gently slide the blade toward the handle until it locks in place.

More details, pictures and an instruction video, can be found here in the online instructions of the Bird Nest Toolkit Spare Blades: