- Four (4) button parts
- Four (4) included hammer tools
- Hammer (not included in kit)
Everything you need to know about the Madam Sew Metal Snap Buttons & Jeans Buttons
METAL BUTTON BASICS
To Install One (1) Metal Button You Will Need
Four Button Parts
- Cap
- Socket
- Stud
- Close post
Four Hammer Tools
- Hole Punch
- Concave Anvil
- Tray (or base)
HOW TO ATTACH A METAL BUTTON
Step 1: Poke a hole in the fabric with a hammer and the hole puncher and put the tray underneath.
Step 2: Put the fabric between the cap and socket. The cap goes through the fabric and the socket covers the cap tip. Now take the pointed anvil, put the point in the socket, and hammer it vertically to attach the cap and socket. Put the little metal tray underneath the cap.
Step 3: Poke another hole in the fabric with the hole puncher tool and a hammer on the tray.
Step 4: Put the fabric between the close post and the stud. The close post goes through the fabric, and the stud covers the close post at the other side of the fabric. Now take the concave anvil, put the concave end over the stud, position the tray underneath, and vertically hammer it to attach the close post and stud.
You're finished!
JEANS BUTTON BASICS
To Install One (1) Jeans Button You Will Need
- Two (2) button parts (cap and nail)
- Hole puncher
- Tray
- Hammer (not included in kit)
Two (2) Button Parts in Two Different Colors
- Cap
- Nail
Two Hammer Tools
- Hole Puncher
- Tray
HOW TO ATTACH A JEANS BUTTON
Step 1: Poke a hole in the fabric with a hammer and the hole puncher, then put the tray underneath.
Step 2: Put the fabric between the cap and the nail. The nail goes through the fabric and the cap covers the nail tip. Now position the cap on the tray and hammer vertically on the flat piece of the nail to attach the cap and the nail.
You're finished!
TIPS AND INSPIRATION FROM OUR BLOG
Finish off this fun fabric wallet with a metal button!
Attach metal buttons to a variety of faux leather projects
INTERESTED IN THE METAL BUTTONS/JEANS BUTTONS KIT?
Sold out
