Everything you need to know about Madam Sew's Spool Stand

This single spool thread stand is a must for any serious home embroidery or sewing enthusiast. It makes sure you get a consistent thread tension, evenly wound bobbins, and less thread breakage, skipped stitches or tangled threads. The Spool Stand prevents your thread getting from stuck or snagged!

Step 1:  Screw the small metal pin (2) to the center of the base (1)

Step 2: Screw the hook post (3) and the nut post (4) together

Step 3: Screw the combined long post (3 and 4) onto the base at the side

You're now ready to feed the thread! 

1. Place your cone or spool on the metal pin at the center of the base

2. Grab your thread and guide it through the hook

3. Place the spool stand behind your machine close to where your spool pin is

4. Thread your machine like you normally do. Use it to wind a bobbin or for your top thread.