Make a Quilted Pillow Part 1 | Madam Sew

Cutting and Chain-Piecing Half-Square Triangle Blocks

Hello all!

I have an exciting project: Let’s make a quilted pillow and learn some basic techniques in the process. We are going to learn to make half-square triangles, how to choose a design, how to assemble them efficiently into a quilt top and I’ll even show you how to insert a zipper! Are you in? Let’s get started!

In this first installment, we’ll learn how to cut and chain piece half-square triangle blocks. The half-square triangle is one of the simplest blocks you can make, but also one of the more versatile ones; depending on how you position them you can create many different designs.

Tools and Materials

Tools and Materials

Cutting

Fold each fat eighth in half matching the short ends. Check that your fabric is squared and has nice straight edges, if not, use your rotary cutter to straighten them.

Align your ruler’s 5” mark with one of the sides (perpendicular to the fold) and cut a strip.

align your ruler

Turn the still folded strip sideways, align your ruler’s 5” mark with the end opposite the fold and cut a 5” square (this will give you two squares, since the fabric is folded).

turn folded strip sideways

Fold your background fabric in half, matching the selvedges, and cut a total of eight squares in the same manner.

Marking

You only need to mark your background fabric. Stack your eight squares wrong side up and use your ruler and gel pen to mark a diagonal line from corner to corner on each square.

mark your fabric

Chain Piecing

Now the fun begins! Pair each marked background square with a print square, right sides together, and pin. For such a small seam one pin is enough.

pair each background square

Stack your pairs with the marked side up and bring to your sewing machine.

stack your pairs

Join our Sewing Club!

Save 10% on your first order

Be the first to know about our tutorials, weekly deals and so much more!

Value is required
Thank you!

Align the marked line of your first square with the guide of your ¼” foot (your line will go under the guide and the seam will be to its left), and sew a straight line to the other end.

align the marked lines

Without cutting the tread or lifting the presser foot, pick up the next square and repeat the previous step.

cut the thread or lift the presser foot

Continue working in this way until you have sewn all the squares.

Now pick up the last square of the chain you have just made, and again align the marked line with the guide of the foot so that you will be sewing a second line of stitches on the other side of it.

Repeat until you go through every square on your chain.

Cutting and Pressing

Snip the squares apart and give them a quick press to set the seams. Then use your ruler and rotary cutter to cut each square along the marked line.

Place your triangles on the ironing board with the print side up and the point towards you. Open them up to reveal your half-square triangle blocks and gently press the top triangle away from you so that the seam folds towards the darker side.

Spray them with the starch before giving them one final press. The starch will stabilize the fabric slightly and make the blocks easier to handle during the rest of the process.

Squaring Up

If you remember, our squares are 5x5 inches, but our blocks will be 4½”, we gave ourselves that extra ½” to accommodate for the variations in stitching and alignment that inevitably occur as we handle the squares. Now we are going to trim them down to the right size and get rid of those dog ears that are left after seaming and cutting. In theory, we can do this with the 6x24” ruler, but it is unwieldy, so we are going to use the square 6x6” ruler.

Lay your first square on the cutting mat, with the seam pointing towards your dominant hand.

Lay the corner of your square ruler with the 1” marking over the block, taking care that the seam runs along the diagonal, hitting the corners of the squares marked on the ruler and making sure that the 4½” marking lies slightly within the block.

Trim the two edges closer to your dominant hand.

Rotate the block 180 degrees, this time aligning the 4½” marking with the freshly trimmed edges. Trim the last two sides.

And that’s all there is to it. Your quilt blocks are ready! In Part 2 of this series, we will work on finding a design and putting our blocks together into a quilt top.

Happy Quilting!

Ana

Blogging for Madam Sew

Back to blog

12 comments

This was great…I usually end up with my half square triangle all whopper sided. Thanks!

Lorrie

Thank you for this tutorial – Looking forward to the next step!

Deb Adams

Thank you for this tutorial – Looking forward to the next step!

Deb Adams

It would be nice to see a picture of the final product so I can decide if I want to make it or not.

Anne

Thank you for this tutorial! Looking forward to part 2.

Dee

Leave a comment

Please note, comments need to be approved before they are published.