Quilting Using the Open-Toe Walking Foot with Guide


Hello all!

I want to introduce you to a great tool for quilting: the open-toe walking foot. It’s not only a walking foot, but an open-toe one as well! This means that all the layers of your quilting sandwich will be fed evenly through your machine, preventing puckering, AND you will be able to see what you’re doing. Plus, the open toe has guides on the foot itself and an adjustable, removable guide that will allow you to easily quilt parallel lines and turn corners accurately.

Open Toe Walking Foot vs Regular Walking Foot

As you can see in the pictures, both walking feet look very similar from the side. Every walking foot has a lever with a fork that hooks onto the sewing machine needle holder screw; as the needle moves up and down, so does the fork’s lever, moving the walking foot’s feed dogs in turn. This is how all layers of fabric move together.

Now, if you look at the open-toe walking foot from the front, you can see that it has a space in the center, where your stitches will be, and also some guides in red. The guides will help you make precise turns and keep even distances between stitching lines.


walking foot detail
walking foot parts

Installing the Walking Foot

The walking foot is not a snap-on presser foot, so get out your screwdriver for this job.

Remove the presser foot shank.

install the walking foot

Hook the walking foot’s fork lever over the needle bar.

attach a walking foot

Screw on the walking foot securely.

screw on a walking foot

Before You Quilt

Before you start working on your quilt, make yourself a small sample with the same or similar fabrics to try your settings, and do a couple of trial runs.

You can quilt with a universal needle and whatever regular thread you normally use. Make sure you do not use quilting thread on your machine, it’s meant for hand quilting and the wax coating it has will gunk up the tension guides inside the machine.

The walking foot is meant to work best with a straight or zig-zag stitch, it will work fine with zig-zag based stitches, but it is not recommended to use for embroidery stitches. Also, when using a walking foot, sew at a medium to low speed; no racing with this guy!

Join our Sewing Club!

Save 10% on your first order

Be the first to know about our tutorials, weekly deals and so much more!

Value is required
Thank you!

Adjusting The Settings On Your Sewing Machine

When quilting, you are dealing with much thicker fabric than usual, plus three layers instead of just two. This will affect the tension of your stitches, so you will have to experiment a bit to see what works best; counterintuitively, I find that I usually need to raise the tension (and note that I say usually and not always, it really varies with each quilt).

Another adjustment that I like to make is to lengthen my stitches to a 4; I mostly do this because I like my quilting lines to be prominent and show clearly on my fabric, but it is a common adjustment when working with thick fabric as it helps the feed dogs do their work.

Lastly, if your machine allows you to change the presser foot pressure, lower it to a 2 or a 1. Consult your sewing machine manual to see if you have this option.

sewing machine settings

Quilting Your First Line

If you are not using a seam as your guide, mark where your line of stitches is going to be.

measuring and marking

Slide your quilting sandwich under the presser foot (you may need to force the foot further up) and align the center mark on your foot with the line on the fabric.

walking foot sewing

Start sewing slowly, keeping your line moving against the foot’s center guide.

sewing with a walking foot

Using The Guides On The Walking Foot

Once you have your first line of stitches, you can use it as a guide and align it with the guides or the edges of your foot to make evenly spaced lines.

guides on a walking foot
guides on a walking foot

The quarter inch markings are also very helpful to turn sharp corners

corners with a walking foot

Using The Detachable Guide of the Walking Foot

Your open-toe walking foot, also comes with a detachable guide that you can use to quilt lines with larger spaces in between them. This guide attaches to the back of the foot from either side by simply sliding it into the hole.

parallel lines walking foot

You can slide the guide closer or further away from the foot until it rests on the spot you want to use as a guide (this can be a seam, the fabric edge, a previous quilting line…), then keep this line aligned with the guide as you quilt your next line.

As you can see there is a lot you can do with this fabulous foot! How do you think you will use it? Let us know in the comments, and ask us any questions as well, we are always happy to answer them.

Anna for MadamSew.com


Important Links Related to this Walking Foot Blog Post

Madam Sew is an online sewing and quilting store. It carries Tools, Notions, Presser Feet, Essentials, Handy Helpers, Organization/Storage Items, and more for sewers and quilters. Plus, it has many manuals and free tutorial blogs to help increase your skills.

Visit us at www.madamsew.com and discover all we have to offer you.


Join our Facebook communities too!