Everything you need to know about the Madam Sew Metal Snap Buttons & Jeans Buttons

METAL BUTTON BASICS

To Install One (1) Metal Button You Will Need

Four (4) button parts
Four (4) included hammer tools
Hammer (not included in kit)

Four Button Parts

Cap
Socket
Stud
Close post

Four Hammer Tools

Hole Punch
Concave Anvil
Tray (or base)

HOW TO ATTACH A METAL BUTTON

Step 1: Poke a hole in the fabric with a hammer and the hole puncher and put the tray underneath.

Step 2: Put the fabric between the cap and socket. The cap goes through the fabric and the socket covers the cap tip. Now take the pointed anvil, put the point in the socket, and hammer it vertically to attach the cap and socket. Put the little metal tray underneath the cap.

Step 3: Poke another hole in the fabric with the hole puncher tool and a hammer on the tray.

Step 4: Put the fabric between the close post and the stud. The close post goes through the fabric, and the stud covers the close post at the other side of the fabric. Now take the concave anvil, put the concave end over the stud, position the tray underneath, and vertically hammer it to attach the close post and stud.

You're finished!

JEANS BUTTON BASICS

To Install One (1) Jeans Button You Will Need

Two (2) button parts (cap and nail)
Hole puncher
Tray
Hammer (not included in kit)

Two (2) Button Parts in Two Different Colors

Cap
Nail

Two Hammer Tools

Hole Puncher
Tray

HOW TO ATTACH A JEANS BUTTON

Step 1: Poke a hole in the fabric with a hammer and the hole puncher, then put the tray underneath.

Step 2: Put the fabric between the cap and the nail. The nail goes through the fabric and the cap covers the nail tip. Now position the cap on the tray and hammer vertically on the flat piece of the nail to attach the cap and the nail.