Everything you need to know about Madam Sew's Spool Stand

This single spool thread stand is a must for any serious home embroidery or sewing enthusiast. It makes sure you get a consistent thread tension, evenly wound bobbins, and less thread breakage, skipped stitches or tangled threads. The Spool Stand prevents your thread getting from stuck or snagged!

There are 4 parts in the box:

1. black aluminum base

2. small metal pin

3. hook post

4. nut post

Step 1:  Screw the small metal pin (2) to the center of the base (1)

Step 2: Screw the hook post (3) and the nut post (4) together

Step 3: Screw the combined long post (3 and 4) onto the base at the side

You're now ready to feed the thread! 

STEP 1: Place your cone or spool on the metal pin at the center of the base

STEP 2: Grab your thread and guide it through the hook

STEP 3: Place the spool stand behind your machine close to where your spool pin is

STEP 4: Thread your machine like you normally do. Use it to wind a bobbin or for your top thread.